For a long period of time with cracks, the metal components or oil components of the holes are rust resistant oil. Due to long-term storage and isolation, the oil usually forms thick oil like substances. Due to the long storage time, the raw materials evaporate and even change their physical and chemical properties, making cleaning more difficult. This will require the use of metal part lubricating grease fungicides, solvent metal part oil cleaning agents that can emulsify and decompose fats well, and the solvent can be reused.

Environmentally friendly cleaning agents are efficient, safe, and economical for cleaning metal components

1. Choose based on the material on the metal surface being cleaned

The cleaning methods for mechanical components and large metal equipment are different, and the solvents used are also different. Generally speaking, solvent based metal cleaning agents are used to clean components, while water-based metal cleaning agents are used to clean large metal equipment.

2.Choose water-based metal surface cleaning agents or solvent based metal surface cleaning agents

If the metal workpiece to be cleaned requires fast volatilization and has rust prevention requirements, solvent based cleaning agents can be considered. If you want to save costs, you can consider using water-based cleaning agents and starting cleaning after dilution.

3.Cleaning process used

If ultrasonic or spray cleaning is used, low foam ultrasonic cleaning agents are generally used; Use specialized electrolytic cleaning agents for electrolytic cleaning; For manual scrubbing or steam cleaning, solvent based cleaning agents are used.

4. Is it necessary to use metal surface oil stain cleaning agents to prevent rust

Except for some equipment and precision components that require long-term work, the vast majority of other equipment is not necessary for rust prevention. So most companies choose water-based metal cleaning agents with lower comprehensive cleaning costs and no rust prevention function.

5.Combination of solvent based metal cleaning agents and production processes

If its anti rust effect is not ideal, it can be considered to add a cleaning tank and add anti rust agent to the tank. By passing the metal workpiece through the tank once, the ideal anti rust effect can be achieved. The consumption of anti rust agent is very small, and it will not increase too much cost.